Which storage option provides an alternative to storing VMS on iSCSI or Fibre Channel SAN devices?

Which storage option provides an alternative to storing VMS on iSCSI or Fibre Channel SAN devices?

Network-attached storage (NAS) is an alternative means of storing and accessing data that relies on file-based protocol, such as SMB and NFS — as opposed to the block-based protocols such as FC and iSCSI used in SANs.

How do I add storage to ESXi 7?

Select the Storage Adapters option. Click the Rescan All link….In the vSphere client, complete the following steps:

1. Select the host.
2. Click the Configuration tab.
3. Click the Storage section.
4. Click Add Storage.
5. Follow the prompts to add the new disk or LUN.

What is the difference between Ethernet and Fiber Channel?

Fibre Channel is more reliable than Ethernet in terms of lossless protocol. Fibre Channel SFP can provide in-order and lossless delivery of raw block data while Ethernet SFP can’t. Transmission Speed of Fibre Channel vs Ethernet SFP: Fibre channel supports a transmission speed of 1, 2, 4, 8, 16, 32, and 128 Gbps.

What is SAN protocol?

The most common SAN protocols are: Fibre Channel Protocol (FCP). The most widely used SAN or block protocol, deployed in 70% to 80% of the total SAN market. FCP uses Fibre Channel transport protocols with embedded SCSI commands.

Which protocols allow the Fiber Channel storage fabric to be shared with the network infrastructure?

Fibre Channel Protocol (FCP) is a protocol that transports SCSI commands over Fibre Channel networks.

How can I use ESX/ESXi with a Fibre Channel storage area network?

You can use ESX/ESXi in conjunction with a Fibre Channel storage area network (SAN), a specialized high- speed network that uses Fibre Channel (FC) protocol to transmit data between your computer systems and high-performance storage subsystems.

What is host-based failover with Fibre Channel?

Host-Based Failover with Fibre Channel. To support multipathing, your host typically has two or more HBAs available. This configuration supplements the SAN multipathing configuration that generally provides one or more switches in the SAN fabric and the one or more storage processors on the storage array device itself.

How many zones do I need for a VMware cluster?

For example a server with two fiber HBA’s (2 initiators) connecting to a storage array with 2 ports on each controller (4 total targets) would require 8 individual zones. A 4-host VMWare cluster would require setting up 32 zones (8 for each host).