What is the rough in height for a shower valve?
Shower Valve Height A height of 28 inches, or 2 feet 4 inches, is standard for valves in bathtub shower units. For shower stalls, install the valve at the standard height of 48 inches, or 4 feet. Install faucets at the same height as the valve, equidistant from the valve.
How far should shower valve sticks out from wall?
Your goal is to center the shower valve between studs 12 inches apart. A little mark at the midpoint of the plates, in line with where you expect the faucet and shower valve to be, helps for the next stage of this project. Next, mark 6 inches on either side of the midpoint.
Do I need a rough in valve?
A Rough Valve is a REQUIRED PART OF EVERY SHOWER. It mixes hot and cold water to create warm water suitable for your shower. Most shower rough-in valves have 4 ports. 2 inlets for the hot and cold water pipes, and two outlets, one for tub spout and one for showerhead.
Can I use PEX for shower valve?
Fittings for a Shower Valve Use threaded PEX water line fittings for shower valves. A plastic bracket forms the sharpest 90-degree angle permitted for this brand of PEX.
How far can shower head be from valve?
A showerhead can be 2-3 feet away from a valve as long as it’s integrated into the plumbing.
Should shower valve be centered?
Re: Correct location of shower head/shower valve All plumbing is typically centered in the space. You’re splitting hairs whether that is inside the curb to the wall or from the shower door glass to the wall.
What is a rough in valve for shower faucet?
The rough-in valve is the heart of system. This is the part of your shower system, in-wall faucet or deck mounted tub filler that lives behind the wall, precisely controlling water temperature and volume.
How to install Grohe shower valve?
Performing the Necessary Preparations. If you are dismantling an old unit,make sure you turn off the water supply first to your bathroom.
How much should it cost to install a shower valve?
To replace a shower valve, you will need to know which valve will suit the type of faucet you have. You can expect to pay $85 to $103 for a replacement shower valve. Installation costs can raise the price to $244 for a single valve replacement job including parts and labor.
How to install Delta shower valve rough in?
– MultiChoice® Universal valve body rough-in kit only – Must purchase trim kit to complete the unit – Forged brass body – Three port diverter rough – Cartridge ships with trim – For use with (3) three or (6) six function diverter
Usually, the shower valve has 4 ports, 2 inlets for cold and hot water, and the other two for shower head and spout. Shower valve rough in height measure from the spout or the tub rim. Sometimes it measures from the finished floor. Generally, the height is 10 inches to 12 inches from the spout.
https://www.youtube.com/watch?v=d4zcKBXGhgg