What is Aerocon bricks made of?
Aerocon AAC Blocks are autoclaved, aerated concrete blocks made with a mixture of cement, fly ash, lime, aluminium powder and water involving an aeration process that gives it the unique cellular structure. Autoclaving gives strength and dimensional stability to blocks.
What is AAC block construction?
Autoclaved aerated concrete (AAC) is made with fine aggregates, cement, and an expansion agent that causes the fresh mixture to rise like bread dough. Cured blocks or panels of autoclaved aerated concrete are joined with thin bed mortar.
What is Siporex brick?
Siporex blocks are lightweight, pre-cast AAC blocks that are used in construction projects that require superior thermal insulation and heat-resistance. They are also referred to as cellular concrete.
Is code for AAC blocks testing?
Compressive strength test of AAC Block Procedure & Result Autoclaved aerated concrete block has separate IS code that gives the step-by-step procedure to test compressive strength. According to IS 6441 (5) remembering 4 point for compressive strength Test procedure. conduct the test on specimen size 15cm×15cm×15cm.
What is Aerocon BTS?
You see, We BTS Aerocon panels dealers, built our panels using a very unique sandwich-inspired system in which two separate fiber-infused cement sheets are filled with an aerated mix of Portland cement and fly ash till they become well-bonded and cured in to a single, more stronger unit- one that’s perfectly ready to …
How do you make sand lime bricks?
In the first step, suitable proportions of sand, lime and pigment are taken and mixed thoroughly with 3 to 5 % of water. Then paste with moldable density obtains. The mixture is molded into bricks using rotary table press which uses mechanical pressure to press the bricks.
Is AAC block better than red brick?
AAC blocks are designed to be more durable and offer greater resistance to fire, seismic activities, moisture, termites, pests, etc. Red clay bricks are more brittle than AAC blocks (roughly 10-12% breakage), which can lead to wastage on-site as well as faults within the overall construction.
How do you keep AAC blocks from cracking?
Use of higher grade of cement to make mortar. Use of rich cement mortar i.e. the cement content is higher than specified in the design mix. Use of very fine sand to make mortar i.e. higher silt content or use of sand which is not graded properly.
What are aerocon blocks?
Aerocon Blocks are the best substitute for environmentally unsustainable materials like clay bricks, hollow and concrete blocks. Also called AAC blocks means Autoclaved Aerated Concrete is now most commonly used for partition walls in building construction.
What are the advantages of Aerocon bricks?
The aircrete (tiny air bubbles trapped) structure of Aerocon bricks results in light-weight blocks. Light weight partition walls are best advised and safe for the building. Due to their closed cell structure, they provide excellent thermal insulation.
What is Aerocon partition wall?
Aerocon blocks acts as better substitutes for bricks and concrete blocks for Partition Walls. The aircrete (tiny air bubbles trapped) structure of Aerocon bricks results in light-weight blocks. Light weight partition walls are best advised and safe for the building. Due to their closed cell structure, they provide excellent thermal insulation.
Is plastering required when using Aerocon bricks?
When Using Aerocon Bricks Plastering is not Required For Inner Walls. We can Directly Use Putty and Paint The Wall. Outer Side Of walls Only Required Plastering. FAQ By normal People is Plastering is not stick on AAC Blocks.