How strong is a 6013 weld?
The tensile strength of a welding rod can be determined by the first two numbers in the electrode’s name. In this case that is 60, so the maximum tensile strength of the 6011 and 6013 electrode is 60,000 psi.
Is there a 6013 welding rod?
E 6013 is the common electrode used for sheet metal welding; E 6010 and E 6011 replace E 6013 whenever the electrode is not available or whenever the welder prefers faster solidification.
What does 6013 mean?
Thus the number E6013 written on an electrode indicates that it is a rutile potassium based flux coated mild steel electrode with 62,000 psi minimum tensile strength having light penetration which can be used in all positions of welding except vertically down.
What is the easiest arc welding rod to use?
The easiest welding rod to use is a 1/8″ (3.2mm) E6013 rod. The fact that most welding schools start teaching with E6013 rods is proof enough. An E6013 has an easy arc strike and is the most forgiving to manipulation errors during welding.
Is 6013 strong enough?
On the negative side, E 6013 does leave a heavy slag formation and is relatively shallow penetrating if not correctly used. But it does yield an extremely high quality weld which, while not as strong as a E7018, is a strong reason not to discount it. Yes, that’s correct, root pass welds.
What is the difference between 6013 and 6011 welding electrodes?
6011 electrodes are great deep penetration compared to 6013 electrodes hence a thicker metal sheet can be used. 6013 electrodes are mostly suitable in medium or light penetration on a slight sheet of thin metal in the welding process. #2. Application and usage
What does E6013 mean in welding?
E6013 electrode Specification & classification E6013 electrodes are classified according to ASME Section IIC, 5.1 Specification for Carbon steel electrodes for Shielded metal arc welding or E4313 as per CSA W48 or SFA 5.1M. Similar to other welding electrodes, each digit in E6013 electrode have its own meaning.
What type of welder for 3/32 6013?
If your runnin 3/32 6013 at 120 amps your basically mig welding with a stick welder, cause your just spraying metal over a large service area. Try to get some 6011 or 6010. Also, what are you welding on?
What is the tensile strength of a 6011 wire?
Just like 6011, it also has a minimum tensile strength of 60,000 pounds per square inch (psi). It is responsible for moderate or small penetration due to the production of a soft electric arc.