How many plants can I grow in a 10×10 room?
The 10′ x 10′ Indoor Grow Rooms will house up to 32 medium plants or about 24 or so if you want them to get bigger than normal. These monstrous grow tents will require an extra room or space in the garage to be set-up in since they are so big.
How many LED grow lights for a 10×10 room?
How many plants per LED grow light?
| Grow Room Size | Square Feet | Recommended # of Plants in Veg |
|---|---|---|
| 6′ x 6′ | 36 | Up to 36 |
| 4′ x 8′ | 32 | Up to 32 |
| 8′ x 8′ | 64 | Up to 64 |
| 10′ x 10′ | 100 | Up to 100 |
How do you set up a perfect grow room?
If you’re new to this, stick to the basics and keep things simple.
- Find a suitable setup space (spare room, garage, etc)
- Make your space light-tight.
- Choose how to configure your space (e.g. tent, entire room or cupboard within a room)
- Get good light coverage in your setup.
- Set up suitable air exchange.
How far should my LED grow light be from my plant?
12 to 18 inches
There is no universal rule for setting the distance but it’s recommended that LEDs are placed 12 to 18 inches away from the plants. Light is among the most vital factors to consider when growing plants because it triggers the photosynthesis process.
What size grow room for 12 plants?
What Size Grow Tent Do I Need For 12 Plants? For 12 marijuana plants, you’d want the same tent sizes we recommend for 10 plants: a 5×10 or 8×6 would work, but the 8×8 or 10×10 grow tents would give you more room to play with. For a SOG grow, a 4×4 would give you a little more space than the 3×3.
What size exhaust fan for 10×10 grow room?
For a 10′ x 10′ space, assuming you have 8 foot ceilings, you’re cubic footage adds up to 800 cf. This means you’ll need an exhaust fan with a cfm rating of around 160 in order to remove the air every 5 minutes.
How many grow lights can I run?
You can run six lights at 4.5 amps, 220 volts for a total of 27 amps, 220 volts or six lights at 9 amps 110 volts (three lights each side of the 220 volt circuit) for 27 amps at 110 volts and 27 amps on the other 110 volts.
How long should a fan be on in a grow room?
Ideally, your extractor fan system should replace the air in your grow room every minute, or at least every three to five minutes.
When should I change my light cycle to 12 12?
With six hours of darkness or less, the plants will continue to grow in its vegetative development as if they were experiencing an extensive summer season. When it is deemed time for the flowering process to start, the light pattern is changed to 12 hours on and 12 hours off.
How many plants grow in a 2×4 tent?
If you keep your plants small, you can fit 8 or more of them in a 2 x 4 foot grow tent. If you let them grow to a “normal” size, you can get two in a 2 by 4 area.
What is the most efficient grow room setup?
This is one of the most efficient grow room setups possible, because it sets up a separate environment for harvesting. Here, you use the same veg set-up as some other systems, with six mother plants, 2 propagation trays, and 25 young plants. This set-up focuses on heavy flowering, with two 8′ x 8′ flower tents.
What size grow tent do I need for a 12/12 schedule?
You can run a 12/12 light schedule with a flower light spectrum. A common multi-chamber growing room is using a 4′ x 4′ grow tent for propagation and vegging, and then moving plants into a 4′ x 8′ grow tent for flowering.
How many plants can you grow in a 12×10 room?
Even in a 12′ x 10′ room, you still have room for a water reservoir, dehumidifier, and nutrient/tool storage. You can grow 24-32 full size plants, or use smaller pots and grow more small/medium sized plants.
What size grow room do I Need?
A common multi-chamber grow room is using a 4′ x 4′ grow tent for propagation and vegging, and then moving plants into a 4′ x 8′ grow tent for flowering. In the veg tent, you can have two mother plants you constantly strip clones from (more information on cloning here), 2 propagation trays for early life, and 9-12 young plants.