How do I connect to Netgear FS728TP?

)NSTALLATION.
Follow these instructions to set up your smart switch.
• NETGEAR FS728TP Smart Switch.
Prepare a PC with an Ethernet adapter and a CD ROM drive.
Insert the Resource CD into your CD drive.
These instructions assume you are using DHCP in your network.
Connect the switch to your network.

How do I reset my Netgear FS728TP?

To return a smart switch to factory default settings in the web management interface:

Open a web browser.
In the browser address field, type the IP address of the smart switch.
Type the password in the Password field.
Click the Login button.
Select Maintenance > Reset > Factory Default.
Select the check box.

How do I update my Netgear FS728TP firmware?

Re: FS728TPv2 Firmware upgrade by browser

On the web-GUI, go to Maintenance > Download.
On the File Type, select Firmware.
On the TFTP Server IP, enter the IP Address of the PC which is set as the TFTP server from which the Firmware is downloaded.

How do I find my Netgear switch IP address?

You can find the IP address of the switch by using the ProSAFE Plus utility or get it from the DHCP server. If the switch cannot get an IP address from a DHCP server, enter 192.168. 0.239. You are asked to enter the password for the switch.

Does Netgear router support PoE?

NETGEAR devices that can be powered by PoE (currently this is only the ProSAFE wireless access points) only accept power from 802.3af-compliant sources, and therefore cannot be powered from Cisco prestandard PoE switches. NETGEAR does not currently sell any PoE injectors, and cannot recommend any third-party products.

How do I reset my Netgear router to factory settings?

How do I reset a smart switch to factory default settings?

In your web browser address field, enter your smart switch IP address.
Enter your case-sensitive password and click Login.
Select Maintenance > Reset > Factory Default.

How do I update my Netgear gs724t?

To update your GS724TPP Smart Managed Pro Switch to firmware version 2.0. 0.16 using HTTP:

Launch a web browser.
Visit NETGEAR Support.
Enter your router’s Model Number or Product Name.
Click Downloads.
Select firmware version 2.0.
Unzip the file if needed.

How do I access my NETGEAR GUI switch?

If your switch is using a static IP address, you can access it by opening your web browser and typing 192.168. 0.239 in the address bar. If you are encountering an error such as Page cannot be displayed or This webpage is not available, your switch’s IP address might have been changed.

How do I access my NETGEAR switch console?

Open a web browser. Type the IP address of the switch into the address bar of the web browser and press Enter. Type the admin password of the switch (the default password is password) and click Login.

What is the fs728tp Smart Switch software administration manual monitoring?

FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual Monitoring the Switch 7-13 v1.0, December 2007 •Multicast Packets Received – Displays the number of good Multicast packets received on the interface since the device was last refreshed.

How do I login to the web browser interface of fs728tp?

FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual 2-2 Introduction to the Web Browser Interface v1.0, December 2007 2. Enter the password (the factory default is password) and click Login. The home screen of the FS728TP Smart Switch browser interface displays.

What are the possible field values of the fs728tp?

The possible field values are: – Absolute – Compares the values directly with the thresholds at the end of the sampling interval. Figure 7-12 FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual

What is the switch management interface for Netgear fs728tp?

v1.0, December 2007 Switch Management Interface Your NETGEAR FS728TP 10/100 PoE Smart Switch with Gigabit Ports contains an embedded web server and management software for managing and monitoring switch functions. This switch operates as a simple switch without using the management software.