How do I reset my Kenmore Elite top load washer?
How to Reset a Kenmore Elite HE Washer
- Press the “Stop” button twice, and then press the “Power” button. Video of the Day.
- Choose a wash cycle (e.g. “Normal”), and then choose your wash options (e.g. “Hot/Cold” or “Cold/Cold”).
- Press the “Start” button to complete the reset process and restart the washing machine.
How do you put a Kenmore Elite washer in diagnostic mode?
3 Answers
- With the washer empty, close the door.
- Push “control/on” or “Start”
- Select “Drain/Spin”
- Select “No Spin” by pressing SPIN SPEED touchpad.
- Push “PREWASH” option four times within 5 seconds. (If there is no PREWASH option, press RINSE HOLD 4 times in 5 seconds.)
- C:00 should light up and begin the diagnostic.
How do you reset the sensor on a Kenmore washing machine?
To perform the Master Reset, carefully unplug the washing machine from the power outlet and leave it unplugged for one minute. After one minute is up, plug the washer cord back into the wall. Next, open and close the door of the washing machine 6 times within 12 seconds to send a “reset” signal to all the components.
How do I clear the error code on my Kenmore washer?
How to Reset the FH Error Code on a Kenmore Elite Washing Machine
- Look for the “Pause/Cancel” button on the washer control panel.
- Press the “Pause/Cancel” button twice to cancel the wash cycle.
- Connect the water supply hoses back to the washer and turn on the water spigots.
Does Kenmore Elite washer have a filter?
This washer does not have a lint filter. The drain pump has a clean out cap that filters the water going into the pump and some lint could be caught in the pump filter and need to be cleaned out.
Does a Kenmore Elite washer have a filter?
Why does my Kenmore Elite washer smell?
Though meant to clean the clothes you put in, the overall smell emanating from your top loading Kenmore Elite is anything but clean. Often the result of mold or mildew, this smell is an indication that your washing machine is due for a good cleaning.
What does F mean on my Kenmore Elite washer?
The F indicates that the washer control detected a component problem. Since the door remained locked, your likely problem was with the drain pump or excessive suds preventing the washer from draining out the water properly. You should then be able to open the washer door and remove the wet laundry.
How to fix a Kenmore top load washer?
Before you do anything,unplug the machine and put on protective gloves.
How to fix Kenmore Elite washer?
Press the “Stop” button twice,and then press the “Power” button.
Why did my Kenmore Elite washer stop working?
Sometimes, the fridge can stop working and there are a number of potential issues involved. When your Kenmore Elite stops working, check the evaporator fan motor, the condenser fan motor, condenser coils, the start relay, or something else. Working through the potential issues to find the culprit is key.
How to fix Kenmore Elite electric dryer not heating?
Testing the Cycling Thermostat. The cycling,or operating,thermostat is installed on the blower unit.