What is default password for QNAP NAS?

What is default password for QNAP NAS?

admin
The default admin password is admin. You can log in to the NAS with admin/admin after resetting the NAS.

How do I reset my QNAP password?

I – I forget My Password And Cannaot Login Device Interface Please press the reset button on the back of NAS for 3 seconds. You will hear 1 long beep. It will reset the admin password to default “admin” and set the network as DHCP. Your data will be left intact.

How do I reset my Qnap without losing data?

This resets the following settings to the default values without deleting user data. TCP/IP configuration: Obtain IP address settings automatically via DHCP….Only TES and TDS NAS models support this feature.

1. Go to Control Panel > System > Backup/Restore > Restore to Factory Default.
2. Click Reinitialize QES.
3. Click OK.

How do I change my QNAP NAS admin password?

60 second clip suggested2:06How to reset admin password on your QNAP/QTS NAS – YouTubeYouTube

How do I reset my QNAP without losing data?

What is the default IP for QNAP NAS?

169.254.100.100:8080
Note: The default NAS IP is 169.254. 100.100:8080. If the NAS has been configured to use DHCP, you can use QNAP Qfinder to check the IP address of the NAS. Make sure the NAS and the computer that runs QNAP Qfinder are connected to the same subnet.

How do I reset my QNAP network settings?

Use one of the following methods:

1. Basic system reset using QES. Go to Control Panel > System > Hardware > Backup/Restore > Restore to Factory Default. Click Reset Settings.
2. Basic system reset using the reset button. Power on the NAS. Press and hold the reset button for 3 seconds.

How do I factory reset my QNAP?

Perform an advanced system reset using one of the following methods.

1. Using QTS: Go to Control Panel > System > Backup/Restore > Restore to Factory Default. Click Reset Settings.
2. Using the reset button: Power on the NAS. Press and hold the reset button for 10 seconds.

What does resetting QNAP NAS do?

Restore Your QNAP NAS to Factory Default Restoring a QNAP NAS to its factory default means you will completely reset the NAS and wipe all of the data that’s stored on the hard drives. If you lost your password, you can perform a system reset without deleting your data.