Is lapping scope rings really necessary?

Is lapping scope rings really necessary?

When using some designs of scope mounts, lapping is recommended to get the best performance. Lapping can increase the amount of surface contact between the ring and scope tube, and also help with proper alignment between the scope rings.

What do you torque scope rings at?

Assuming your firearm has the appropriate bases already properly installed, and your firearm is unloaded: Step 1. Secure the scope rings to the base at the recommended torque value. Most rings are held secure between 35-45-inch pounds.

Is the Marlin 795 scope any good?

The Marlin 795 is an astounding out of the box rifle, and well worthy of a larger than average scope. Because The Marlin 795 has a standard 3/8” dovetail on the top of the receiver, some people are turned off. This is absurd as the 3/8” dovetail has been around for decades and is an extremely popular way of mounting scopes to small rifles.

Will an air rifle mount fit on a Marlin?

I had previously used an Air Rifle mount for my Marlin, and it worked fine for using a lower end scope. So I just did some rebuilding to the Marlin and I wanted something a little higher quality for the scope mounts (read adding a more expensive scope)… The mount fits fine.

Is there an alternative to the Marlin Model 60 open sight?

NEW! March 2018 shipped direct from Gun-Guides, LLC. Finally, there’s an alternative to the original Marlin and Glenfield Model 60 and 795 open sights! Dust off that old .22 and take it to the range or field! 2 Standard Weaver mounts – Adjust as needed – Use 1 or both!

Does a 795 need a 10/22?

On the other hand, it doesn’t need it. Out of the box, many people, including myself, maintain the 795 is superior to the 10/22, and that only through additional modification and upgrades can a 10/22 beat out a stock 795.

https://www.youtube.com/watch?v=pgVB24OkJyM