Is a 727 A good transmission?
The 727 is highly adaptable and strong enough to handle 450hp engines. This makes the A-727 a good candidate for installing into your Chrysler, GM or AMC car or truck. The Torque Command “8” was released in 1956 for use in the full-size Chrysler cars. The rest of the Mopar fleet began using this transmission in 1957.
Is a 727 transmission automatic?
When it first appeared in 1962, the 727 TorqueFlite automatic transmission immediately established a reputation for strength, efficiency, light weight, and superior performance compared to the competition.
What vehicles have a 727 transmission?
These transmissions were found in nearly every rear-wheel or four-wheel drive Dodge, Plymouth, or Chrysler model built with a V8 during its 30 years on the market, including a wide range of trucks alongside passenger and muscle cars.
How do I identify a Chrysler 727 transmission?
An A-727 can also be identified as being a 1978 and newer lockup units just by examining the transmission’s input shaft. It was built with a lockup if the shaft is smooth at its last half inch, on the contrary, if it is splined to the end of the input shaft, then it is a non-lockup transmission.
How much HP can a stock 727 handle?
The 727 is a relatively simple piece when compared to other automatic transmissions, and its strength is a function of that simplicity. We’ve put stock TorqueFlite transmissions behind big-blocks pushing upwards of 600 hp and found they not only survive, but perform quite well.
What is the difference between a 727 and 904 transmission?
The 727 was the only available automatic transmission for big block cars. You could get a 727 for a small block, which where mostly for 340’s and 360’s or you could get a 904 which was primarily for the 318. 727 is a much heavier duty transmission and can really take a beating.
How much horsepower can a 727 handle?
How much power can a 727 handle?
How much does a TorqueFlite 727 weight?
Two sizes of torque converter were available, being 10-3/4″ or 11-3/4″. Gearing for the 727 is 2.54:1 for 1st gear, 1.54:1 for second, 1:1 for third and 2.21:1 for reverse. The weight of the transmission is a hefty 161 lbs.
Are TorqueFlite transmissions good?
The TorqueFlite Chrysler A904 and A727 ( Torque-Command) transmissions were introduced in early 1960. They were extremely reliable and bulletproof. They were installed in Dodge, Jeep, and Chrysler cars, vans, trucks, and even race cars. The TorqueFlite is considered one of the best Dodge/Chrysler transmissions.
What is a 727 TorqueFlite transmission?
The Chrysler Torqueflite 727 was introduced in 1962 as the replacement to the A-488. For three decades, it was Mopar’s flagship automatic transmission, and an important transmission in the history of Chrysler, as well as Jeeps and other car makers.
How can you tell if a transmission is 904?
According to the Teufert website the Torqueflite 727 has an irregular-shaped pan with 14 bolts fastening the pan to the bottom of the transmission housing. The Torqueflite 904 has 14 bolts with a rectangular-shaped pan with one corner on an angle.
When did the 727 TorqueFlite transmission come out?
Chrysler 727 Torqueflite Automatic Transmission. The Chrysler Torqueflite 727 was introduced in 1962 as the replacement to the A-488. For three decades, it was Mopar’s flagship automatic transmission, and an important transmission in the history of Chrysler, as well as Jeeps and other car makers.
What kind of transmission does a 727 Mopar have?
727 Racing Transmissions 727 Transmission The 727 or Torque-Flite 8 – is the King Kahuna of Mopar trannies. Ideal as a Street & Strip unit in stock and modified muscle cars, and a strong candidate for full-on drag cars, many modifications are available for this unit to make it ideal for many classes and power levels.
What kind of transmission does a Chrysler A727 have?
When speaking of automatic transmissions, the Chrysler A-727 or TorqueFlite 8 units are not only easy to find because of their many years of use, but they are also very strong and can be used in many performance and non-Chrysler applications, as well.
Will a 727 Torque Command 8 fit in a Chrysler?
The 727 is highly adaptable and strong enough to handle 450hp engines. This makes the A-727 a good candidate for installing into your Chrysler, GM or AMC car or truck. The Torque Command “8” was released in 1956 for use in the full-size Chrysler cars.