How much HP can a stock 2JZ-GTE handle?

Capable of 2,000 hp. Tightly-packaged, inline configuration.

How much torque can you get out of a 2JZ?

The 2JZ is a 3.0 liter inline-6 utilizing twin turbos to pump out 320 horsepower and 320 lb-ft of torque.

What is the most powerful 2JZ?

– FASTEST 2JZ Ever Recorded (Mind-Blowing Speed)

Which is faster RB26 or 2JZ?

Both are large, inline six cylinders with similar dimensions and weight. The increased displacement of the 2JZ-GTE yields the same output but it achieves it’s peak power at 1,200 rpm lower then the RB26. The 2JZ also nets 31 lb ft torque more at 400 rpm lower then the RB. This hands the advantage to the 2JZ.

How long does it take to tune a 2JZ?

Within a few hours your 2JZ is up and running and just waiting to be tuned by the closest tuning mastermind… One of the worlds most famous engines in the tuning industry.

Is the 2JZ-GTE a NASP engine?

2JZ GE is a NASP engine, but with higher compression than the GTE so is not suitable for adding a turbo without reducing the compression ratio, a significant job in it’s own right. 2JZ-GTE introduced in 91 but wasn’t put in a Supra until 1993 and production lasted 5 years.

How much HP can the stock 2JZ-GTE handle?

2JZ-GTE amazing can handle around 600bhp of reliable power on stock internals. The stock fuel and turbo can run around 1.2 bar of boost so fit a boost controller and adjust this to suit your car and you’ll see around 400bhp which is a pretty low cost high power modification.

What’s new in the new tune selector?

New Tune selector, to be used in the whole system as a variable to change one or more settings at the same time. New Custom fuel stoich AFR setting. Lean power cut from lambda target table as an option. New digital input: Logging, reset and start new file. Added option to set max input frequency for speed inputs.