How does a Telecaster 4-way switch work?

4-Way Switching For Your Tele. We get asked about 4-Way Switching a lot. It’s a simple mod that when added to your Telecaster, puts your pickups in Series, instead of Parallel. You can get a pretty beefy tone with both pickups on like this, and it adds a new dimension to your favorite guitar.

How does a Telecaster switch work?

Essentially, the Telecaster 3-way switch consists of two 2-way switches on one lever. On a Tele, each of the two pickups uses its own stage to achieve the “both pickups together in parallel” middle position.

How to wire a 4 way Telecaster?

Telecaster 4-Way Wiring Diagrams This wiring diagram assumes you are using a metal control plate. If you are not using a metal control plate, you will need to run a small ground wire from the volume pot to the tone pot. Wiring diagram courtesy Seymour Duncan Pickups Wiring diagram courtesy Seymour Duncan Pickups

How do you wire a 4 way switch?

A 4-way switch has 4 terminals or poles.

Two terminal/poles are labeled “in,” and two are labeled “out.”

Pairs of wires,called “travelers,” will connect to each side.

When the switch is operated,current will either travel straight through or crisscross.

How to wire a 4 way light switch diagram?

– These two wires are the “travelers” to the 4-way switch. – Note that a 3-conductor cable is often used for connecting 3-way and 4-way switches to each other, containing black, white and red conductors. – Some 3-way switches may have the “common” terminal on one side and the two “travelers” on the opposite side.

How to wire 2 way switch diagram?

Two wire cable runs from the light to sw1 and 3 wire cable runs between sw1 and sw2. 3 and 4 way switch wiring diagram pdf from annawiringdiagram.com print the cabling diagram off plus use highlighters to trace the circuit.