Are line output converters good?
If your stereo doesn’t have preamp outputs, or not enough of them, a line output converter is a great solution. You connect the stereo’s speaker wires to the LOC’s inputs and use RCA cables to run the signal from the LOC to your amplifier.
How do I choose a line output converter?
Tech Talk: Choosing the Right Line Output Converter (LOC) for Your Install
- Do you need just the basic?
- Do you need a signal sense 12 volt turn on output?
- Do you need high power outputs?
- Do you need OEM load detect compatibility?
- Do you need summing inputs?
- Does your factory system have high voltage outputs?
What is a Line Output Converter for?
What Is A Line Out Converter? Your aftermarket amplifier is most likely designed for unbalanced RCA (low level) input. A Line Out Converter takes this high voltage speaker level input and converts it to an RCA low voltage output for your aftermarket amplifier.
What is a 4 channel line output converter used for?
Converts speaker-level audio signals (aka high-level) to RCA audio signals (aka low-level) for use when adding audio amplifiers. Four channels with 55W power handling per channel ensure reliable and powerful audio.
What is the yellow wire on a line out converter?
This unit is fed constant +12V power from the battery on its yellow wire. It will output a +12V signal on its blue wire only when it detects a signal on the speaker level inputs. So the answer is Yes, this will supply a remote turn-on signal and you don’t have to run it to the head unit.
How do I wire a line out converter?
ririck Schrute Farms Beets Established Member.
Do I need a line out converter?
You would not need this line output converter when using an aftermarket radio. Your new radio will provide the RCA outputs needed for adding amplifiers. You would use this to add RCA connections a factory radio that did not have any.
How to connect a car stereo line out converter?
Electrical Butt Connectors
Do I need a line output converter?
You will need a High Low Converter or Line Output Converter to add an amplifier (subwoofer or 4 channel amplifier) to convert your factory stereos speaker wire into a low level input for your new amplifier. What is A Line Output Converter Also Known as A High Low Converter?