What causes a pilot light to go out?

What causes a pilot light to go out?

Some of the possible serious reasons for pilot lights to go out include loose or broken gas valves, thermocouples or heat exchangers, faulty venting, low gas pressure, or high winds. If you believe there is a serious problem, don’t hesitate to contact a professional.

How do you reset the pilot light?

How Can I Restart My Pilot Light?

1. Step 1: Turn off your furnace.
2. Step 2: Locate your gas valve.
3. Step 3: Hold down the red button.
4. Step 4: Light the pilot light.
5. Step 5: Let go of the button.
6. Step 6: Turn your gas back on.
7. Step 7: Turn your furnace back on.

What to do if your Bradford white water heater is not lighting?

Common solutions for: Bradford White Water heater not lighting 01 – Igniter Some water heaters use an igniter to ignite the gas. If the igniter fails, the burner will not light.

Why won’t my water heater light?

The pilot ignites the water heater’s gas burner. If the pilot does not light, the water heater will not heat. Sometimes, carbon deposits can build up on the pilot and eventually create a restriction. If the pilot is restricted, try removing it and clearing it with a stiff brush and/or compressed air. If the pilot cannot be cleaned, replace it.

What should I do if my water heater is not heating?

If the pilot does not light, the water heater will not heat. Sometimes, carbon deposits can build up on the pilot and eventually create a restriction. If the pilot is restricted, try removing it and clearing it with a stiff brush and/or compressed air. If the pilot cannot be cleaned, replace it.

Why is there no spark on my hot water heater?

Some water heaters use a spark electrode to light the pilot flame. The spark electrode sends intermittent high-voltage sparks to light the pilot. If the spark electrode won’t produce sparks, it is likely defective.