How do I reset my CDA dishwasher?
Press and hold the ‘Programme selection’ button for approximately three seconds, until the ‘End of programme’ Indicator light flashes and the ‘Programme Indicator’ light switches off. Then close the door. The dishwasher will drain for approximately thirty seconds.
Why is my CDA dishwasher not working?
It could relate to the power supply, plug, fuse, or circuit breaker. Other CDA dishwasher problems here could be related to the water inlet or machine filters being blocked, or snags with the door not closing properly. This indicates a possible power failure or defective water inlet.
How do you reset a dishwasher?
To reset a dishwasher, you need to hold the start button down for three seconds or, failing that, switch your dishwasher off at the main power supply. If that won’t sort out the glitch, you may have problems with your power, water source, door latch, or internal issues.
Why is there water left in the bottom of my dishwasher?
Water in the bottom of the dishwasher results from clogs in the filter, garbage disposal, drain hose, drain pump, or air gap. When food or sediment build up within these systems, the dishwasher won’t drain properly. Locating the blockage and clearing the debris will solve the problem.
How do you turn on a CDA dishwasher?
To switch the power to the dishwasher on or off, press the “Power” button (1). When you switch on the dishwasher, the “End of Programme” light will illuminate.
What does F2 mean on a bush dishwasher?
F2 – Water is not draining Check that the drain hose is not blocked or kinked. Check that the filter combination is not blocked.
Is CDA a good make?
CDA are the fastest growing appliance manufacturer in the UK and an industry leader in product categories such as wine coolers. Offering high quality kitchen appliances built with your lifestyle in mind. Based in Nottinghamshire, CDA have continued to speak directly with you, the consumer, since 1991.
Should there be standing water in dishwasher drain?
Standing water in the filter area Water in this area is actually perfectly normal, useful even. It’s there to keep the seals from drying up. It drains when a cycle starts and is replaced with fresh water at the end of the cycle.
How do you use rinse aid in dishwasher CDA?
40 second clip suggested1:32Filling Dishwasher Rinse Aid Video: Instructions from Sears PartsDirectYouTube
How to contact integrated dishwasher installation and use and maintenance?
Page 1 Integrated Dishwasher Installation, Use and Maintenance Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T: 01949 862 012 F: 01949 862 003 E: [email protected] W: www.cda.eu www.cda.eu…
What do you need to know about dishwasher instructions?
Page 4 Important • Read the instructions prior to installation and use of the appliance. • Do not lean or climb on the open dishwasher door, to prevent damage. • Close the dishwasher door after use to prevent accidents. • Use only detergents, salt and rinse aid specifically designed for dishwashers.
How do I contact CDA customer service?
Page 28 T : 01949 862 012 F : 01949 862 003 E : [email protected] labour Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : [email protected] W : www.cda.eu www.cda.eu copyright © CDA 2014…
How do I fix the CDA error on my Kenmore washing machine?
Close the water tap, separate Inadequate the water inlet hose from the tap water supply and clean the filter. Restart your machine and contact CDA service if the error continues. Close the tap and contact Continual fill CDA service.