Why is my paint sprayer leaking?

The spray gun is leaking from the Nozzle This occurs when the Needle Packing Nut is too tight, compressing the Needle Packing too tightly around the Needle. This occurs when the Needle Packing nut is too loose. Remember that the needle packing must be tight enough to prevent any leakage of paint material.

Will Graco tips work on Wagner?

You can use Graco guards on Wagner spray guns, and Wagner guards on Graco spray guns. FARBMAX and Titan also use the standard 7/8″ thread, so you should be able to use the spray guards across all models and brands.

Why is my paint sprayer not building pressure?

If this is the issue you experience the most likely cause is that the transducer is worn out. The transducer signals to the airless pump that pressure is needed and signals to run the pump to build pressure. Failure to build pressure often indicates that you need to replace the transducer.

What is the number one rule when using airless spray guns?

A good rule of thumb for an airless spray gun is to hold the gun about 12- 14 inches from the products surface.

Why is my airbrush dripping?

If the spray gun is dripping just after you have finished painting this is most commonly caused due to wear or damage of your fluid nozzle and fluid needle. You can start by inspecting the fluid needle to see if their is any obvious deformation to the needle.

Why is my water spray not working?

If your sprayer doesn’t work, it’s either because the nozzle is blocked, the piston seal is damaged or the inner tube isn’t immersed in fluid.

How to clean a Wagner FlexIO paint sprayer?

What you need to know about using Wagner paint spray guns

Supplies you’ll need to clean your paint sprayer

How Wagner sprayers and HVLP sprayers work

And much more!

How to spray polyurethane with Wagner?

You want the wood you are finishing to retain its natural light coloration.

You want each coat of polyurethane to dry quicker.

You want a polyurethane that has a lower number of volatile organic compounds

You do not mind applying more coats of the varnish to achieve the finish you desire.

How to repair an airless paint sprayer?

The cable is damaged: if your machine has been used for years,it is very common that the cable is old and could be damaged and the electricity is not

The fuse is blown.

One of the most common problems to happen is that the equipment is on but the pressure level is on minimun,so it looks like the device is off or

How to spray with a Wagner FlexIO paint sprayer?

Wagner Paint Sprayer Not Spraying. First,check your prime/spray knob.

Leaking Paint. This is one of the most irritating problems that can get out of hand fast.

Priming Malfunction. When your Wagner paint sprayer won’t prime there are a few solutions to the problem.

Air in the Spray.

Lack of Pressure.