What is the Building Code NZ?
The Building Code is contained in regulations under the Building Act 2004. The Act governs the building sector and also sets out the rules for the construction, alteration, demolition and maintenance of new and existing buildings in New Zealand.
What performance criteria are set out in the NZ Building Code?
The Building Code sets clear expectations of the standards buildings should meet. It covers aspects such as structural stability, durability, protection from fire, access, moisture control, services and facilities, and energy efficiency.
What clause of the New Zealand Building Code covers fire safety?
This clause provides objectives that apply to clauses C2 to C6 to: (a) safeguard people from an unacceptable risk of injury or illness caused by fire, (b) protect other property from damage caused by fire, and (c) facilitate firefighting and rescue operations. C1 provides objectives for each of the C clauses.
What is a dead end open path?
Dead end That part of an open path where escape is possible in only one direction. Comment: A dead end ceases to exist where the escape route reaches a point in the open path which offers alternative directions of travel, or at a final exit or an exitway.
How do I find my local Building Code?
In order to learn which codes are being used and how they will affect you and your construction project, contact your local building inspection department, office of planning and zoning, and/or department of permits.
What is required for code of compliance NZ?
The application for a code compliance certificate must include certificates relating to any gas fitting work or prescribed electrical work. Failure to provide an energy work certificate is sufficient reason for the building consent authority to refuse to issue a code compliance certificate.
What is the Building Act 2004?
The Building Act 2004. The Building Act 2004 sets out the rules for the construction, alteration, demolition and maintenance of new and existing buildings in New Zealand. It aims to improve control, encourage better design and construction and provide greater assurance for consumers.
How close to the boundary can I build NZ?
How close may I build to the boundary? You can build up to a height of 2.5m high on the boundary, if the Height in Relation to Boundary Rule applies. However, ground floor windows of habitable rooms in the Living and Rural Villages Environments must be at least 1.2m from the boundary.
What does C AS1 cover?
Scope of Acceptable Solution C/AS1 includes buildings such as single household units, certain multi-unit dwellings and detached dwellings, garages that are part of a household unit or shared by more than one household unit.
How many exits must a house have?
Measuring Height of Fire Exits Class 2 to 8 buildings, however, are required to have no less than two fire exits on each floor, on top of the required horizontal exit. This requirement applies if each storey of the building has an effective height of ≥25m.
What is a fire cell NZ?
Firecell Any space including a group of contiguous spaces on the same or different levels within a building, which is enclosed by any combination of fire separations, external walls, roofs, and floors.
What is risk group SH?
“Risk group SH Risk group SH applies to detached houses and to buildings containing. a number of separate residential units, provided there is no more than one unit above another. Therefore, the Acceptable Solution covers the fire safety requirements for a row of townhouses.
What is clause C3 of the building code?
Building Code Clause C3 Fire affecting areas beyond the source, regards vertical or horizontal fire spread, and surface finishes. This clause requires design and construction for a low probability of injury or illness to people not in close proximity to a fire source.
What are the codes for building construction in New Zealand?
NEW ZEALAND BUILDING CODE Clauses C1, C2, C3, C4, C5, C6 10i Department of BuilDing anD Housing – 10 april 2012 CODE CLAUSES MINISTRY OF BUSINESS, INNOVATION AND EMPLOYMENT PAGE 13 |27 JUNE 2019 | NZBC C CLAUSES
What are the NZBC fire safety clauses for buildings?
The relevant NZBC Clauses for Fire Safety in buildings are C1, C2, C3 and C4. ARCHIVED DEPARTMENT OF BUILDING AND HOUSING
What is C2 to C6 of the building code?
Safety objectives for people, other property and firefighting applied to clauses C2 to C6 of the Building Code. Safe design and installation of fixed appliances using controlled combustion and other fixed equipment.