What is KingZip?
Kingzip (2D) is a high load-bearing structural solution, suitable for projects worldwide. System is designed to cyclonic levels. KingZip (2D) Outer Profile Dimensions. Nominal Gauge (mm) 0.8, 0.9, 1.0 & 1.2.
What is insulated roof?
Insulated roof panels consist of metal panels with steel skins and an insulating foam core. This foam core, usually PIR or PUR foam, adds a layer of insulation to buildings which increases the energy efficiency. Insulated roof panels are weather-sealed and provide a strong thermal and moisture barrier.
How much does a standing seam roof weigh?
Steel standing seam will weigh about 85 – 120 pounds per 100 square feet of roof area. Aluminum standing seam weighs about 70 pounds per 100 square feet. In contrast, asphalt shingles weigh from 275 – 425 pounds per 100 square feet.
What is a standing seam steel roof?
Standing seam metal roofing is a concealed fastener roofing system which features vertical or trapezoidal legs with a flat space in between. Since these panels are attached to the roof deck with clamps, they’re free of any holes from nails or other fasteners which could allow moisture to seep through.
What roof insulation is best?
One of the most common and effective ways to insulate your roof is with polyurethane spray foam. This spray-applied plastic is known to be highly effective for sealing any cracks as well as resisting wind and heat. The foam is applied to the underside of your roof deck and directly onto the slates and tiles.
How much does a 16 foot piece of metal roofing weigh?
Table of Sheet Steel Weights and Thicknesses
| Weight of Sheet Steel | ||
|---|---|---|
| 13 | 0.0897 inch | 3.750 lb/ft2 |
| 14 | 0.0747 inch | 3.125 lb/ft2 |
| 15 | 0.0673 inch | 2.813 lb/ft2 |
| 16 | 0.0598 inch | 2.500 lb/ft2 |
What is kingzip?
Kingzip is a high specification insulated standing seam roof system suitable for new build and refurbishment: i) roof slopes 1.5° or greater, after deflections ii) curved roofs 150 metre radius and over. 1000mm cover width Panel Length Dimensions & Weight
What wind testing has Kingspan carried out on the kingzip Linea?
Kingspan have carried out cyclonic wind testing on the KingZip Linea system in accordance with the requirements of the BCA B1.2 for low-high-low performance requirement up to 6.33 kPa. For further details please contact Kingspan Technical Services.
What are the load span tables for kingzip insulated standing seam roof panels?
• The load span tables for the Kingzip insulated standing seam roof panel system are generally dictated by the structural performance of the halters which have a working load of 1) 3.1kN for the KS500 Kingzip panel and 2) 5.1kN for the KS1000 Kingzip panel. • The fastener quantities above are minimum and are to be used as broad guidelines only.
What is the standard length of a kingzip Linea?
Factory manufactured up to a standard length of 15m Please contact our technical department for further information. KingZip Linea achieves a class 0 rating as defined in various national building regulations.