What is a Bargeboard in construction?
What is a bargeboard? Bargeboards refer to the fascias located at the gable end or side of a roof. Used to protect the roof timbers of a building, bargeboards can also have a significant impact on the general aesthetics of the exterior of your property.
What is a verge board?
(ˈbɑːdʒˌbɔːd ) noun. a board, often decorated with carved ornaments, placed along the gable end of a roof.
Are bargeboards structural?
Bargeboards, soffits and fascias are an important part of the roof structure. If damaged or missing they can allow weather penetration which can have serious consequences for internal structural components and decorative finishes. Modern soffits, fascias and bargeboards are often manufactured in PVCu plastic.
What is Bargeboard used for?
Bargeboard (probably from Medieval Latin bargus, or barcus, a scaffold, and not from the now obsolete synonym “vergeboard”) or rake fascia is a board fastened to each projecting gable of a roof to give it strength and protection, and to conceal the otherwise exposed end grain of the horizontal timbers or purlins of the …
What is soffit board?
Soffit Board Soffit boards are the horizontal boards which fit under the roofline which together with fascia boards or capping boards finish off the roofline in a weatherproof seal. They are available in 3 different styles, standard utility board, vented soffit boards or lightweight hollow soffit boards.
What’s a soffit board?
Soffits are boards used to close off the underside of common rafters when used in roof construction. Also known as soffit boards, they are mostly fixed horizontally but occasionally they can be fixed directly to the underside of the common rafter in which case they are known as sloping soffits.
What is the board under the soffit?
The soffit is part of the overhang where your roof meets your siding. The fascia is the attractive board along the side of the overhang and the roof that helps your roof appear finished. Your gutter sits atop the facia board. The fascia is also known as a “transition trim” between the home and the roofline.
What is the difference between a fascia board and a barge board?
While fascias and soffits support the guttering of a property, barge boards are attached to a gable to provide added strength, protection and aesthetics. They appear as an inverted ‘V’ under the edges of the roof verge, protecting the exposed materials much like a fascia.
How thick should fascia boards be?
Fascias are typically made from 1-inch material, with the width being enough to cover the rafter width. Typically rafters will range from 2×6 to 2×8, although some are larger depending on the roof construction.
What is verge board on a roof?
Originally, this Victorian wood trim — also called vergeboard or verge board ( verge being the end or edge of a thing) — was used to hide the ends of rafters. It hangs from the projecting end of a gable roof.
What are the design details of eaves and verges?
Design Details – Eaves and Verges. 1 Eaves with over fascia ventilation. Set top of fascia board at correct level and fit ventilator in accordance with Manufacturers Recommendations. 2 Eaves with soffit ventilation. 3 Open eaves with ventilating rafter tray. 4 Cottage eaves with over-fascia ventilation. 5 Bedded verge.
What is a bargeboard gable?
Bargeboard is exterior house trim, usually ornately carved, that is attached along the roof line of a gable. Originally, this Victorian wood trim — also called vergeboard or verge board (verge being the end or edge of a thing) — was used to hide the ends of rafters.
How do you install embedded verge on a wall?
Bedded verge Carry underlay 50mm onto outer leaf of gable wall. Bed an undercloak of plain tiles laid face down with bottom ends exposed, projecting not more than 50mm beyond face of wall. Carry tiling battens over undercloak and finish 100mm from verge edge.