Menu Close

How do I access ACEManager?

How do I access ACEManager?

Launch an internet browser and type 192.168. 13.31:9191 into the search bar and hit enter. The ACEmanager login should appear if the connection was successful. Internet Explorer, Firefox, and Chrome are all compatible.

How do I log into my Sierra Wireless modem?

The default login credentials are: Login: user, and Password: 12345. *If you are connecting via USB, download the USB drivers from the Support page for your AirLink model: http://www.sierrawireless.com/Support/Downloads.aspx ** Only for devices with a Wi-Fi X-Card installed.

What is Ace Manager?

ACEManager is a configuration and diagnostic tool for the Sierra Wireless AirLink Raven modems.

How do I factory reset my Sierra Wireless RV50?

Press and hold the reset button for 7-10 seconds until the Power LED turn red. This will indicate a user-initiated hardware factory reset. Press and hold the reset button for 7-10 seconds until all four LEDs turn red. This will indicate a user-initiated hardware factory reset.

How do I connect my AirLink RV50?

The sections below should be followed in the order listed to setup the AirLink RV50….Go to the Services tab, SMS section and set the following:

  1. SMS Mode: Control and Gateway.
  2. ALEOS Command Password: 12345.
  3. Local Host IP: IP address of the Ignition Server.
  4. Local Host Port: 17342.
  5. ALEOS Port: 17341.

How do I reset my Sierra Wireless modem?

How do I change the APN on my Sierra Wireless?

Sierra Wireless: How to Configure APN (Access Point Name)

  1. Login to the admin page of the device.
  2. Navigate to WAN/Cellular.
  3. Navigate to Cellular > SIM Slot 1 Configuration or SIM Slot 2 Configuration.
  4. Enter the appropriate APN value into the Override APN or User Entered APN field.
  5. Click Apply.
  6. Click Reboot.

How do I reset my rv50?

How do I log in to acemanager?

Launch an internet browser and type 192.168.13.31:9191 into the search bar and hit enter. The ACEmanager login should appear if the connection was successful. Internet Explorer, Firefox, and Chrome are all compatible. Other browsers may work, but have not been tested.

How do I change the password of a device in acemanager?

Click on edit. Select the ‘ACEmanager password’ setting. At next device heartbeat, the password will be configured on the device. Go into Monitor system list and select all the devices you want to update the password on by filtering to the correct devices and using the “select all” checkbox.

How to reset the modem in Ace manager?

Ace Manager 22 20070914 You  can also use Write  from the Modem menu option. Reset Reset will restart the modem.   The other ways to reset the  modem are by pressing the reset button on the front of the  modem or removing the power from the modem. Note: It is generally best to reset the modem after you have made

How do I connect to Ace manager via Ethernet?

Ethernet Connecting After you select your connection method, click OK to begin the  connection. The status bar below the Configuration Panel will show the  progress of the connection.  The progress will show how the  connection is being established (in the example, Direct PPP)  with the speed and then an indication of how many bytes of Ace Manager

Posted in Interesting